Atomic Programming Ltd Home Page

Jennic JN5148 & JN5168 Wireless Microcontroller Support Tools

1. JN-RD-6039 JN5168 USB Dongle
	The AP-420 is an FCC/ETSI/IC approved JN516x USB Dongle that features a JN5168 wireless microcontroller and allows communication with this JN5168 device from a USB connection. This USB dongle is sold by NXP as part of the JN5168-EK001 evaluation kit and this dongle has been manufactured and tested using the same facility. The details are available in reference design JN-RD-6039 (NXP JN5168 Support Page). Please contact us for larger volume discounts. Available from stock

AP-420

1 off

£75

AP-420-5

5 off

£295

2. OM15020 JN5169 USB Dongle
	The AP-421 is an FCC/ETSI/IC approved JN5169 USB Dongle that features a JN5169 wireless microcontroller and allows communication with this JN5169 device from a USB connection. This USB dongle is sold by NXP as part of the JN5169-EK001 evaluation kit and this dongle has been manufactured and tested using the same facility. It is based upon the reference design JN-RD-6039 (NXP JN5169 Support Page). Please contact us for larger volume discounts. Available from stock

AP-421

1 off

£75

AP-421-5

5 off

£295

An adapter that allows JN5168 modules to be soldered to boards that have a JN5148 module footprint.

Note: Not all JN5148 pins are available as the JN5148 modules have more pins than are available on the JN5168 modules. See product page for details

[more]

Available from stock

£9.95

4. USB Programming Dongle
	The USB Programming Dongle provides a simple solution for programming a Flash memory device on a JN5148-based application board using the standard Jennic JN51xx Flash Programmer tool Available from stock

AP-401

USB Programming Dongle with USB A connector

£45

AP-401C

USB Programming Dongle with USB A connector and USB extension lead

£50

AP-402

USB Programming Dongle with USB Mini-B connector

£45

AP-402C

USB Programming Dongle supplied with USB Mini-B connector and USB A to Mini-B cable

£50

A mezzanine PCB that can be used to mount JN5148/JN5168 Modules onto the mezzanine pins used on Jennic/NXP Evaluation kits. See product page for full details.

[more]

Available from stock

AP-4024

Blank PCB. No mezzanine connectors fitted

£9.95

AP-4024-68C

This version has the mezzanine connectors fitted to allow JN5168 Modules to be fitted

£16.95

AP-4024-48C

This version has the mezzanine connectors fitted to allow JN5148 Modules to be fitted

£16.95

6. JN516X Socket Programming Board
	The AP-425 is a programming board for the NXP JN5161/4/8 Wireless Microcontroller ICs. It allows programming of the entire flash memory (including the boot sector) and is suitable for both development and production use. The index sector can also be programmed to allow customer MAC addresses and security to be programmed. The board has a 40pin ZIF socket and needs to be connected to an AP-114 JTAG programmer. Atomic programming also offers a programming service for JN516X silicon (including reeling of the devices). Please contact Atomic Programming for details. [more] Available from stock

AP-425

AP-425 plus Universal Power supply

£250

AP-425-114

AP-425 with universal power supply and an AP-114 JTAG programmer.

£495

7. AP-114 - ISP/JTAG Programming System (Jennic Version)
	Includes Programmer, 10 and 14-way header cables and USB cable. Also incl. special cable assembly for Jennic JN5148-EK010 evaluation kit Sensor and Controller boards. The standard 10-way cable is also suitable for debugging and programming Jennic modules via the Training Platform, and also for debugging the AP-300 Wireless Gateway [more] Available from stock	£350